Put A Towel And Bucket Below The Sink’s Drain Pipe.
Insert a faucet through the hole. Take the chrome flange and twist it onto the nylon sleeve until the base of the flange is snug against the shower wall. It’s a good idea to flush the new faucet and check for leaks before you’re done.
Place The New Faucet Handle Over The.
Then crawl under the sink with some. Turn on the water and let it run for two or three minutes. The faucets normally come with a gasket that ensures tight fastening and prevents leakage.
Turn On The Faucet Then Drain It Entirely.
Inspect the sink for any damage that may need to be repaired before installing a new faucet. Start by turning off the water supply. You will need a few tools, but it is still easy
I Will Walk You Throu.
Danny, from the home depot, walks through the installation of a new sink faucet in just. From the underside of the sink assemble in order: Fit the rubber gaskets (if the faucet and valves have them) onto the faucet’s components, and then.
Through The Sinkhole On Top, Insert The Shank Of The Faucet.
Clean the area thoroughly and wipe dry. Tighten it properly with the help of the basin wrench. Insert the supply lines and the shank of the faucet through the hole in the deck plate or sink.