The First Step Of The Installation Is To Disconnect The Trap And The Remainder Of The Pipe Connections.
Remove the electrical cover plate found on the bottom of. Turn clockwise until the disposal is locked into place. Use some plumbers putty to place the mounting bracket.
Next, Remove The Strainer Assembly And Separate The Parts Of The Mounting.
The insinkerator badger 5 is a popular choice for many homeowners. Pull off the drain hose from the sink drain and slide it over the. Attach the power cord of the garbage disposal.
Remove The Disposer’s Bottom Plate.
Roll half inches of plumber’s putty in your hand and put it on the opening of the sink. Strip off about 1/2 inch of insulation from each wire of the power cord. You should attach your new disposal by lifting it into place and twisting it until secure.
Put Plumber’s Putty Around The Drain Outlet On The Bottom Of The Disposal Unit.
Connecting the disposal once mounted, attach. What type of garbage disposal should i get? Now you need to form a rope that is ½ inches in diameter.
To Do This, First, Remove The Electrical Plate Which Exists At The Bottom Of The Disposal Unit.
If you don’t have one, you’re in luck because we’re going to show you how to install a garbage disposal in 9 easy steps. Now set the new sink flange. The typical installation cost for both the faucet and garbage disposal is.