Ensure The Screws Align To Where Your Toilet Base Will Be And Mark Down The Drilled Holes On.
The first real step in replacing a toilet is. If you’re installing an entirely new toilet, and not replacing an old one, continue on to step 3. Move the toilet over the flange and line up the holes with the closet bolts.
You Probably Already Own All The Tools Required.
Connect the water pipe to the cistern and using a wrench, tighten up until it’s nice and secure. Alternatively, installing a toilet at the end of a hallway, in a utility room or off the kitchen will mean you have more space to work with. When it’s in position, firmly press the toilet against the floor.
Use The Tubing Cutter And Cut The Supply Pipe So That It Fits In The Shutoff Valve.
The center of the water closet flange should be around 12ins from the back wall. After further checking the compatibility of the new toilet and making sure that it comes into contact with sewage pipes, you can install the new toilet. Have a bucket to hand to collect the water.
Connect The Water Pipe To The Cistern.
A place to put the cold water supply line. And you no longer have to follow the 'two. Carefully read the installation instructions packaged with the toilet and identify the parts and then follow these steps to install a new toilet:
Although Toilets May Look Complicated, They Are A Relatively Simple Technology.
If not, skip to the next step. Other than style changes and newly established water efficiency regulations, little. When installing a toilet make sure the shutoff.