It's likely you'll also need to replace the existing. This means that the flip of. Connect the green grounding screw on the switch to the circuit's bare copper or green grounding wires.
Add Up The Wattage Of The Bulbs In All The Fixtures The Switch Controls To Make Sure It Falls Within The Switch Rating Listed On The Package Or Instructions.
If you're replacing a toggle switch, you'll need a new cover plate designed for. Now, take a jumper wire and connect between the switch load terminal and lower hot terminal. To do this wiring, simply remove the break away fin tab between two hot terminals (hot side).
The Brass Terminal Of Ordinary 3.
I'm laid back and get along with everyone. Then use a voltage tester. The light switch has three wires.
Push The Switch And Outlet Back Into Their Electrical Boxes.
Turn off the power to the switch at the circuit panel or fuse box. The white is also known as the neutral wire, and this wire connects with the silver screw. Sometimes it is handy to have an outlet controlled by a switch.
In This Wiring, The Two Brass Or Gold Terminals Are Interconnected Through Travelers Wires While The Line Terminal Is Connected To The Hot Wire From Circuit Breaker.
Unscrew and remove the switch plate; The black or sometimes red wire, also known as the hot wire,. If the circuit has just a single.